close

LECTRO, Electric wall mounted patio heater, 2000W

LECTRO is an infra-red outdoor electric patio heater, ideal for instant warmth in the garden. This model is wall mounted and has a heating power of 2000W. The heating element is Quarz. Adjustable thermostat control. Automatic overheat protection.

£ 49.99
Availability: Out of Stock




Features:
  • Infra-red electric patio heater- for outdoor use
  • Instant warmth in the garden
  • For wall fixing
  • Heating power 2000W
  • Heating element is Quarz
  • Adjustable thermostat control
  • Automatic overheat protection

Code: LECTRO2000-W
Bar Code: 5031599045405
Product Size: 50cm length. 16cm width. 36cm height.
Packaging Information: Mail order inner with colour label outer
Packing Size: 53.5cm length. 24.5cm width. 27.5cm height.
Country of origin: China


Corresponding to the back of the product of hanging a hole in the wall to the position of the punch
With a diameter of 8 bit bunching has said the metope of good position.
The four plastic expansion respectively into the wall faces make plastic expansion outside diameter and the wall
Take four ST4*35mm screw fastening respectively in plastic expansion,is leakage in the metope outside screw 4 to 5 mm
Lift products ,make the product back hanging pieces of the number of the four corresponding four screw into the exposed on metope,zola into the security hole.
Product head can move up and down 45 degrees ,to meet customer demand
Pay attention:the product at the top and the distance of the ceiling is more than 0.5m,the product side Edge and coner of the distance is greater than 0.5m,at the bottom of the proeuct and the distance of the ground is more thant 2 m,in order to ensure the safe use the product.
In order to the safe use of the product,please press the use of the correct installation ,dont put the product inversion or fixed on the ceiling
Before installing your appliance,you must disconnect the electrical supply at the circuit breaker.
Use the four screw to fix the bracket of the heater on the wall on a right position and then fix the heater on the bracket.